1、LED street lamps
Road lighting is an important component of urban lighting. The traditional street lamps often use high pressure sodium lamp, 360 degrees of light emitting, light loss shortcomings, resulting in a huge waste of energy.
LED street lamp is different from conventional, LED light source adopts low voltage DC power supply, by the high white GaN based blue LED and yellow synthesis, has the advantages of high efficiency, safety, energy saving, environmental protection, long life, fast response, high color rendering index unique advantages, can be widely used in the road.

2、Solar street lamps
Solar street lamp is by crystal silicon solar battery, maintenance of VRLA battery (colloidal battery) electrical energy storage, super bright LED lamp as the light source, and the intelligent charge and discharge controller is used to replace the traditional lighting lamps in the public power.
Without laying cables, without AC power supply, does not generate electricity; the use of DC power supply and control; with good stability, long service life, high luminous efficiency, convenient installation, high safety performance, energy saving and environmental protection, economic and practical maintenance etc.. The utility model can be widely used in urban main roads, secondary roads, residential areas, factories, tourist attractions, parking lots and other places.

3、Courtyard lights
Usually refers to 6 meters below the outdoor road lighting, the main component is composed of light source, lamps, lamp pole, flange, base embedded part is composed of 5 parts, because of its diversity, courtyard lamp with beautiful landscaping and decorative characteristics of the environment, so it is called the landscape garden lights.
Mainly used in urban slow lane, narrow lane, residential areas, tourist attractions, parks, squares and other public places outdoor lighting, can extend people's outdoor activities, improve the safety of property.

4、Buried light
The lamp body is pressed, or stainless steel, durable, waterproof, thermal performance; surface cover for 304# stainless steel materials, corrosion resistance, anti aging; silicone rubber seal, excellent waterproof performance, high temperature resistance, anti aging; high strength tempered glass, good transparency, light radiation range, bearing capacity strong.
All solid screws are made of stainless steel; the protection level of IP67; optional plastic embedded parts, convenient installation and maintenance. Widely used in shopping malls, parking lots, green belts, parks, tourist attractions, residential areas, urban sculpture,
Walking streets, buildings, steps and other places, mainly buried in the ground, used for decoration or instructions for lighting, and also used to wash walls or trees, the application of considerable flexibility.

5、Wall washing lamp
Also called type LED lamp, because its shape is long, some people call it LED line lights, its technical parameters and LED light similar to a circular structure LED cast light, heat sink strip structure LED wall washing lamp is more a good deal.
As the name suggests, the lights are washed like water. They are mainly used for architectural decoration and lighting, as well as for the outline of large buildings. LED is widely used because of its characteristics of energy saving, high light efficiency, rich color and long life.

6、Tunnel lights
Tunnel lamp is to solve the vehicle in or out of the tunnel to produce visual brightness mutation "black hole effect" or "white hole effect" for tunnel lighting special lamps. The shell adopts high strength and toughness alloy environmental protection material. The transparent parts are toughened glass, dustproof, waterproof, corrosion resistant and rustproof.
Resistant to strong collision and impact ability; spraying processing multichannelshockproof structure and high surface, high strength high frequency vibration impact on the lamp at close range, and can work stably for a long time in the workshop, the roadbed, tracks the high frequency vibration and humidity, high temperature environment. Good electromagnetic compatibility will not cause interference to the transmission network.

7、Landscape lamp
Landscape lamp, also known as decorative lighting, both ornamental and lighting properties. The landscape lamp uses different shapes, different light colors and brightness to make landscaping. For example, a festive lantern shaped landscape light red light green square, a coconut tree lamp stands on the edge of tropical. The landscape lamp is suitable for the square, the residential area, the public green land and so on.
Be careful not to use too complicated, so as to avoid distracting, make the landscape look cluttered. Landscape lights also have some disadvantages, such as: not green, etc..

8、Lawn lamp
Design of lawn lamp mainly in appearance and soft lighting for the city landscape add safety and beauty, and generally has the characteristics of convenient installation, strong decoration, can be used for decorative lighting, Les Loges Du Park Hotel, park green square, and other places of the green belt.

9 、Underwater lamp
An underwater lamp is simply a light that is placed under the water. The appearance of small and delicate, beautiful appearance, and some buried lights, almost more than a installation of the chassis, the chassis is fixed with screws, underwater lamps are generally LED light source. When it is electrified, it can send out a variety of colors, bright and colorful, usually in parks or fountain pools. Has a strong ornamental. It is mainly used for fountain and underwater operation.

10、Fountain lamp
What forms of fountains are to be looked at, such as dry fountains, pools, fountains, indoor or square (outdoor), etc., with different fountain styles and different installation methods. General wiring pipe in waterproof below, reserve the position of the bottom lamp, throw the mouth, use high-grade rubber and plastic cable wiring can, safety consideration should be done repeatedly grounding, remember to use leakage short circuit type protector.

11、Guardrail tube
LED tube is composed of red green and blue three primary colors mixed color to achieve seven color changes, using the pulse width modulation of the output waveform, adjusting LED lamp conduction duty cycle, scanning speed quickly in the case of using visual inertia to gradient effect.
A tube through the control chip, can change a segmented seven different colors, and gradient, flicker, scanning, chase, water and other effects, to determine the length of tube length according to the actual effect, the conventional length of one meter. Anti ultraviolet radiation, waterproof effect. Widely used in all types of building walls, buildings, wheel frame, amusement landscape lighting, KTV, all kinds of bridge, lighting and other places.

12、Stage lights
A LED and LED lighting luminaires for stage lights are similar, the main parts are: shell, LED lamp, two lens, LED driver, DIP dial switch, radiator, shell, a mounting bracket.

13、Mobile light
Mobile lights are often used in indoor and outdoor mobile workplaces, as well as outdoor television, film photography and other places.

14、Traffic lights
The traffic light is divided into: non motor vehicle signal lamp, signal lamp, motor vehicle, pedestrian crossing lights direction indicator lights (arrow lights), Lane lights, flashing warning lights, level crossing signal lamp.

15、 Car lights
The type of automobile lamp can be divided into two kinds of lighting and auxiliary according to the use, of which lighting is the only one of the types of automobile lamps, only the headlights and some cars are equipped with fog lamps, and the rest belong to auxiliary lights.
16、 Light belt / strip
The band refers to the LED lamp with a special process welding on copper or ribbon flexible circuit board, and then connected to the power supply light, because of its luminous shape such as a light band named.